How to Charge an Off Stamp Vape – Quick & Safe Guide

April 11, 2025

What’s the best way to recharge your social and personal life?

Simple- Start with a 100% Off-Stamp Vape!

It’s a smart-looking disposable that comes in 2 pieces. A pod with a modular design and a battery dock.

You can use the pod alone. But with the dock attached, it becomes a power couple.

The disposable has intense flavor, multiple puff counts, great features, a sleek look, and long battery life to offer.

Then again, just like most rechargeable disposables, Off-Stamp needs a recharge. The charging method is also the same.

So, how do you charge an Off-Stamp?

Look at the battery indicator light.
Attach the pod part to the battery dock part.
Spot the USB-C port at the side or bottom of the battery pack.
Use a quality Type-C cable and charger.
Plug the charger and vape into the power source.
Unplug when it’s 100% and the light goes green.

What’s An Off Stamp Vape?

A 2-part bar!

An Off-Stamp vape is a device with a stamp in its operational mechanism. It’s a line of disposable vapes that have two parts: a modular pod and a detachable battery dock.

Modular Pod: This part carries the e-liquid and the coil. There’s a low-power battery, too. The rating varies based on models. But once the e-liquid is out of juice, you throw the pod away.

Battery Dock: This part features a separate high-powered battery unit that magnetically attaches to the pod. It’s reusable and rechargeable. You buy it once with the initial kit.

The Off-Stamp can last a day and a half between charges. However, it varies based on the power rating, model, use frequency, and upkeep.

Find the best deal on Off-Stamp Vapes in VapeDeal!

Off Stamp Models

You get two kinds of Off-Stamp basically- the X-Cube and the SW line. Here, the latter has two kinds, puff-wise. SW9000 and SW16000.

X-Cube | Versatile and Advanced

The X-Cube comes in two pieces.

There’s a modular design pod system and a reusable smart battery dock.

The pod holds 18mL of liquid with 5% nic strength. Plus, it has a dual mesh coil to deliver up to 25,000 puffs.

You can use the pod alone with its 100 mAh battery. Need more power?

Snap it into the battery dock. It adds a robust 1100 mAh and brings the total to 1200 mAh. That means a longer vaping sesh.

The battery pack has more features than you think.

There’s a 2.25-inch TFT color display. It’s bright and easy to read. The display shows

Battery life
E-liquid level and
Power modes: Light, Turbo, Normal

With this, you can easily monitor the pod’s status and adjust it accordingly.

The airflow is adjustable. It has a slider at the bottom of the disposable. You get to experience both MTL and restricted DTL.

Right on the bottom of the battery pack, there’s a USB-C port. It ensures quick power-ups. However, the dock doesn’t have a port.

The best parts are- it boasts 5 screen animations and the ability to vape during charges.

SW9000 and SW16000 | Simple and Effective

Slightly similar, slightly different. Similarities?

Both come in two pieces. They have a nice, tight draw to give you an incredible vaping experience.

What about the differences?

The SW series doesn’t have a screen, airflow adjustment, or power modes. Instead, it has a simple LED indicator to show battery status:

Green
Blue
Red

The fixed tight MTL draw is perfect for nic salt lovers.

There’s a smart version of the battery bank for the SW series. It shows incredible animations with the power status.

Both the basic and smart docks boast a 200 mAh pod and an 800 mAh battery dock. Together, they pack a 1000 mAh power.

Plus, there’s a USB-C charging port on the battery pack’s side to keep things running. You can even vape the pod as it charges like the other models.

The SW9000 carries a 13 mL e-juice tank and has around 9,000 puffs. Meanwhile, the SW16000 packs 17 mL of juice and gives you an impressive 16,000 puffs.

Preparing to Charge Your Off-Stamp Vape

Here’s what you need-

High-quality cable
High-quality charger
Power source
Off-Stamp’s Battery Dock and Disposable

For the power source, consider options like-

Wall power outlet
Extention socket
USB port on an AC adapter
Power bank
Computer
Laptop

If you want efficient and quicker charging, try to plug the bar directly into the main power source. It can be a wall socket or an extension socket.

Step-by-Step Guide to Charging Your Off-Stamp Vape

Step 1: Check Your Battery Level

First, look at the battery level.

All Off Stamps have a low-battery indicator, although the method varies in models.

The X-Cube series shows it on the animated display screen. However, the basic ones use colors to tell you the battery status. For instance–

Green: 70-100% (high)
Blue: 30-69% (medium)
Red: Below 30% (low)

If it’s red, it’s time to charge!

Step 2: Grab the Right Charger

All Off Stamp models have a Type-C charging port. But wait, it’s not on the disposable part. Instead, you’ll find the port-

At the bottom of the X-Cube’s dock or
On the side of the SW’s dock

Get the compatible charging components for the port.

Ensure both the Type-C cable and adapter are high quality. It’s because they naturally provide faster and more stable charging.

Try to use the recommended ones.

Most vapers suggest using a simple 5V 1A charger for disposable vapes.

The reason is that the wrong chargers can be dangerous. Research says-

“Mismatching and wrong charging components can bring about multiple issues like fire hazards and accidents.”

So for Off Stamps, use quality cables and chargers under 10-20 watts. Higher power can cause overheating and battery damage.

Step 3: Plug It In

Take your charging cable.

Now, connect it to your Off Stamp battery dock.

Plug one end into the Type-C port and the other end into a power source. Use any device as a power supply. Try a wall socket or extension socket.

Both help increase the charging rate.

Step 4: Connect the Off Stamp Securely

Ensure you firmly plug in the cable.

Note that the dock charges stand-alone or with the pod attached. You can’t charge the pod alone since it doesn’t have a port.

If the pod is out of juice, just attach it to the dock and plug the latter. Your disposable should start charging.

Step 5: Watch the Indicator Light

Check the LED light or Display Screen on your vape when it’s charging.

The light will stay red during charging.

It turns green when it’s fully charged.

Depending on the battery rating, the Off Stamp can take about 30 to 60 minutes to charge fully.

Step 6: Unplug When Green

As the light goes green, disconnect the charger. Your vape is ready to use again!

Troubleshooting Common Charging Issues

Off Stamp Not Charging

Identify what caused this.

Several factors can prevent your device from charging. For instance-

Dirt
Loose connections
Bad charging components or
Factory defects

Solutions

Secure the cable to the battery dock and power source. Ensure it's fully plugged in.
Try a different power source.
Clean debris or lint from the vape with a Q-tip or cloth.
Replace damaged charging components and check the power source.
Still not working? The Bar’s battery may be dead- replace it.

Off Stamp Charging Slowly

Again, the offenders can be anyone. It can be -

Low-quality charger or cable
Charging from a weak power source
Dirty charging port or fake product

Solutions

Use a high-quality charger and cable from the same brands.
Plug into a wall socket. It’s faster than a PC or laptop.
Clean the charging port if it is dirty.
Avoid fake products. Buy genuine.

Safety Tips For Charging Off Stamp Vape

Use Quality Chargers Only

Off-Stamp disposables are rechargeable. And that’s one of the best features.

However, it doesn’t mean you can use any random charging components. Wrong cables and adapters can lead to serious mishaps, including fire hazards. By wrong, we mean chargers that are-

Faulty, mismatched, and low-quality.

Always use high-quality cables and adapters that match your vape’s voltage and specs. This helps-

Keep the battery healthy and
Extend the lifespan

Always Stay Nearby When It’s Charging

When charging your Off-Stamp bar, stay somewhere near.

You leave it alone, and boom- it leads to overcharging, then sparks, and even fires. All these are risky matters.

Moreover, overcharging can degrade the battery life. This can cause problems like leaked gas and potential explosions.

So, we suggest you keep an eye on the Off-Stamp, especially when it’s close to 100%.

Not sure about the charging time? Check the manual or search online for help. Usually, it should take around 30-60 minutes to fully charge an Off-Stamp.

Remember, your attention can prevent accidents!

Check Out Your Off-Stamp Periodically

Take a moment to check your vape regularly.

Look for signs of trouble. It can be

Sparks
Leaks or
Scratches

Also, evaluate these aspects of your vape-

Poor performance
Slow charging
No charging
Damaged parts

All these mean there’s a problem with the Off-Stamp. If you see anything dangerous, throw the vape away.

Regular inspection can help you catch issues early and fix them before it’s too late.

Store It Safely

When you store your Off-Stamp, Vape matters too.

Keep both the battery dock and pod in a cool, dry place. This is because extreme temperatures and harsh conditions can harm the e-cigarette. Be it-

Heat
Moisture
Oil
Direct sunlight
Debris

All these can cause malfunctions, fires, or explosions.

Experts suggest the same. They say-

“Batteries of electronic devices need to be used and stored safely.” And this applies to your Off-Stamp vape as well, even if it has a built-in battery.

When not in use, store the vape in its original packaging. If you don’t have it, try a solid metal case.

They’ll keep your disposable vape safe from sudden damage and maintain its performance.

Maintenance Tips for Optimal Performance

Regular Cleaning

Keep your vapes clean. Here’s how you can do it-

Wipe down the exterior: Use a soft cloth. This will remove dirt and residue. Ensure you always keep the mouthpiece clean.

Clean the charging port: Dust can block the port and lead to a slow charge and other issues. Gently blow on it or use a cotton swab.

A clean vape charges better and lasts longer.

Proper Usage

Heavy use isn’t an issue, but aggressive use is.

Frequent vaping can cause overheating and burnt flavors. And they aren’t something you’d like to encounter.

So, take gentle, steady puffs instead. This will prevent such issues as well as coughing and discomfort.

That’s not IT. You also get a smoother and more enjoyable vaping experience.

Maximize Off-Stamp Battery Performance

Follow the recommended charging practices

Always use a quality charger. It ensures correct voltage and current for optimal charging.

Ensure full charge before unplugging

Charging in short bursts strains the battery. Let it reach 100%. This helps maintain the battery’s capacity and lifespan.

Know your Off-Stamp

Familiarize yourself with the vape’s modular design. Read the user manual for specific features and upkeep tips. Proper use enhances the experience.

Clean the port area

It keeps the Off-Stamp in its finest shape.

Avoid Overcharging and Undercharging

Don’t leave your vape plugged in overnight or charge it with inadequate power.

Overcharging causes overheating.
Undercharging reduces efficiency.

Frequently Asked Questions

How do I charge my off-stamp vape?

Check the battery life. Find the USB-C port. Attach the pod to the battery dock. Use a compatible charger. Connect and charge. That’s the right way to charge an off-stamp vape.

How do I know if my off-stamp is charging?

The blinky battery level on the X-Cube display and the red light indicator in the SW series are the ways to tell if your off-stamp vape is charging.

How do you charge your vape?

Most vapes come with a charging port that lets you charge your vape. It can be Type B or Type C. Use a compatible cable and adapter for the job. Ensure quality components.

How do I charge my dead disposable vape?

It’s better to avoid charging a dead disposable vape through methods that can lead to mishaps.

How long do off-stamp vapes last?

A day and a half. That’s how long an Off-Stamp vape lasts between charges.

Back to blog