Tesla Invader 3 240W Box Mod Description
Tesla is back at it again! They present to you, the Invader III, offering some of the highest wattage achievable, its power is not to be taken lightly. Capable of generating 240 watts, it will power anything you throw on it no questions asked! Low resistance coils are also a walk in the park for the Invader 3 as it can activate as low 0.10 ohms. The Tesla Invader III uses 18650 batteries in series and an advanced proprietary chipset. Its proprietary chipset allows for high maximum power, protection against short-circuits, and reverse polarity protection because safety and power should always go hand in hand! One thing you’ll quickly notice is that it does not feature a screen. The screen removal was necessary to reach 240 watts as it is one less thing your batteries have to power. Instead you will have a potentiometer, and adjusting power is rather simple, turn clockwise for more power or counterclockwise for less power. The Tesla invader III is powerhouse suitable for all atomizers!
This Product Features:
- Maximum Wattage Output: 240.0w
- Battery: 2*18650 High-drain batteries (Not Included)
- Minimum Resistance 0.10
- Low voltage protection
- Short circuit protection
- Low resistance protection
- Reverse battery protection
- Magnetic battery cover
You Will Receive:
- 1x - Tesla Invader 3
WARNING!!! - Charging through wall sockets with phone blocks can damage devices as well as batteries. They typically do not push out the proper amperage and also never stop charging once the batteries are full, which eventually wears out the batteries and also risks burning up your chip in your device. If you want to charge the device through USB please use the cable provided and use a computer or gaming system such as a PlayStation or Xbox so the charge will cut off once it is full. The best way to charge your batteries is to use an external charger for various safety reasons. You can purchase an external battery charger here.
Tesla Invader 3 240W Box Mod Details